原位热压烧结,in-situ hot-pressing sintering
1)in-situ hot-pressing sintering原位热压烧结
1.6) solid solution bulk materials by high-temperature pressureless calcining andin-situ hot-pressing sintering respectively have been particularly studied.6)固溶体粉体和原位热压烧结制备高纯度Ti_3Si_(1。
2)in situ sintering原位烧结
1.Microstructure and forming mechanism of(Ti,V)C/Fe composite synthesized byin situ sintering;原位烧结合成(Ti,V)C/Fe复合材料的组织及形成机理
2.8) were prepared byin situ sintering and the effect of vanadium content on the microstructure and mechanical property of the alloys were analyzed.用原位烧结法制备了不同V与Ti原子比(0,0。
英文短句/例句
1.Research on Microstructure and Heat-treatment of (Ti, V)C/Fe Composites Synthesized by in Situ Sintering;原位烧结合成（Ti，V）C/Fe复合材料的微观结构与热处理研究
2.Effect of Heat Treatment on Microstructure and Wear Resistance of(Ti,V)C Steel Bonded Carbide Produced by In-situ Sintering热处理对原位烧结(Ti,V)C钢结硬质合金组织及耐磨性的影响
3.In-Situ Synthesis of WC-Co Composite Powder and Sintering Preparation of Bulk Cemented CarbidesWC-Co复合粉的原位合成与块体硬质合金的烧结
4.Preparation of In-situ Reinforced Porous Nickel-based Composites by Laser Sintering激光烧结法制备原位增强型多孔镍基复合材料
5.In-situ reaction hot-pressing sintering process of SiC/MoSi_2 compositesSiC/MoSi_2复合材料的原位反应热压烧结工艺
6.Effect of WC content on sintering process and structure properties for in situ sintering synthesis of Mo_2FeB_2WC对原位合成Mo_2FeB_2烧结及组织性能的影响
7.In-situ Reactive Sintered Si_3N_4 Multiphase Ceramics and Its Environmental Performance;原位反应烧结制备氮化硅基复相陶瓷及其环境性能
8.In-Situ Fabrication of TiC/Ti_2AlC Composite by Spark Plasma Sintering-Reactive Sintering (SPS-RS) Method and Its Mechanical Property放电等离子烧结原位制备TiC/Ti_2AlC复合材料及室温力学性能评价
9.Research on Mechanical Properties of SiC/MoSi_2 Composites Prepared by Technology of In-situ Reaction Hot-pressing Sintering原位反应热压烧结SiC/MoSi_2复合材料的力学性能研究
10.Preparation and Characterization of SiC-MoSi_2 Composite Materials by In-situ Pressureless Reaction Sintering原位无压反应烧结制备SiC-MoSi_2复合材料及其性能研究
11.Effect of Sintering Process on Conductivity and Mechanical Properties of In-situ Formed Mo_2C/Cu-based Composite烧结工艺对原位生成Mo_2C/Cu基复合材料力学与导电性能的影响
12.In-situ synthesis of periclase-hercynite material:sintering process and properties原位合成方镁石-铁铝尖晶石材料的烧结工艺及性能研究
13.Nanostructured Bulk Polycrystal LaB_6 Cathode Prepared by in-Situ Spark Plasma Sintering放电等离子烧结原位制备LaB_6多晶纳米块体阴极材料
14.Research of mechanism on sintered bricks made from high volume fly ash;粉煤灰烧结砖原料处理与烧结反应机理的研究
15.Application of Normalization for In-situ Multi-element Raster Analysis in Laser Ablation-Inductively Coupled Plasma Mass Spectrometry Illustrated with Garnets激光烧蚀-等离子体质谱结合归一定量方法原位线扫描检测石榴石多种元素
16.Study the Influence Raw Composition and Sinter Craft Parameter on Sinter Phase Structure and Strengh;原料组成和烧结工艺参数对烧结矿相结构及强度的影响研究
17.Research on the Process of Selective Laser Sintering Rapid Prototyping;激光选区烧结快速原型技术工艺研究
18.Study on Improving Reduction Disintegration Index of the Low-temperature Sinter改善烧结矿低温还原粉化指数的研究
相关短句/例句
in situ sintering原位烧结
1.Microstructure and forming mechanism of(Ti,V)C/Fe composite synthesized byin situ sintering;原位烧结合成(Ti,V)C/Fe复合材料的组织及形成机理
2.8) were prepared byin situ sintering and the effect of vanadium content on the microstructure and mechanical property of the alloys were analyzed.用原位烧结法制备了不同V与Ti原子比(0,0。
3)hot-press sintering热压烧结
1.Research onhot-press sintering process of N type thermoelectric materials ZnO;N型热电材料ZnO热压烧结工艺研究
2.Si_3N_4 ceramics were prepared by aligning theα-Si_3N_4 whisker in the substrate via tape casting andhot-press sintering.利用流延成型使α-Si_3N_4晶须在基体中定向排列,并采用热压烧结技术制备了Si_3N_4陶瓷。
3.Ti_3Al/TiC+ZrO_2 composites were prepared by mechanical alloying andhot-press sintering.采用机械合金化和热压烧结制备了Ti3Al/TiC+ZrO2复合材料。
4)hot pressing sintering热压烧结
1.Beside the raw materials and formulation,the quality of diamond segments depend on thehot pressing sintering techniques and the quality of graphite mould.人造金刚石锯片的刀头是采用粉末冶金工艺来制作的,其刀头的质量性能除了取决于原材料的选择与配比,还取决于热压烧结工艺以及石墨模具的性能。
2.Silicon carbide particles/copper (SiCr/Cu) composites were prepared byhot pressing sintering with electric resistance heating.用电阻热压烧结法制备了碳化硅颗粒/铜(SiC_p/Cu)复合材料。
3.LaB_(6)ZrB_(2) composite powders with different content of ZrB_(2) were synthesized by carbon thermo-reduction method and the corresponding polycrystalline composites were fabricated byhot pressing sintering method.通过热压烧结法制备了相应的复合材料,其性能测试结果表明:随着ZrB2含量的增加,LaB6ZrB2复合材料的硬度和弯曲强度均随之增大,而断裂韧性则先增后减,在ZrB2质量分数为21%时,其断裂韧性达最大值。
5)hot pressing热压烧结
1.TiB2 cermet containing 7wt% Fe and 3wt% Mo was fabricated byhot pressing.实验结果表明,随着热压烧结温度升 高,材料抗弯强度、洛氏硬度出现峰值,热压烧结时间延长,抗弯强度有所下降。
2.The effects of different doses of the raw materials in ZrO_2-B_4C-C towards the calcined and sintered products were investigated byhot pressing.采用固相反应和热压烧结方法研究了ZrO2B4CC体系反应原料的不同掺量对产物相组成的影响规律,并对烧结体进行了物相分析、粒度分析、显微结构分析、相对密度和化学分析。
3.SiC/SiC composites were prepared byhot pressing using nano-SiC and sub-micrometer SiC powders for matrix formation.采用纳米SiC和亚微米SiC粉料作为基体形成原料,通过热压烧结技术制备了SiC/SiC 复合材料。
6)hot-pressing sintering热压烧结
1.Pressureless andhot-pressing sintering of Ce-TZP/Al_2O_3 composite ceramics;无压及热压烧结法制备Ce-TZP/Al_2O_3复相陶瓷材料
2.Preparation of oriented plate-like WC grains in cemented carbides by high-energy ball milling and specialhot-pressing sintering;高能球磨热压烧结制备定向排布板状WC硬质合金
3.In-situ reactionhot-pressing sintering process of SiC/MoSi_2 compositesSiC/MoSi_2复合材料的原位反应热压烧结工艺
延伸阅读
反应热压烧结(reactived hot pressing sintering)分子式：CAS号：性质：又称反应热压烧结(reactived hot pressing sintering)或分解热压烧结(detomposition hot pressing sintering)。利用高温下粉料可能发生某种固相物理化学反应时处于较高能量的活化状态下进行热压烧结的方法。有以下几种类型：(1)相变热压烧结，如利用氧化锆在980～1100℃之间发生相变，同时进行热压，可获得高密度的细晶陶瓷；(2)分解热压烧结，如利用镁或铝的氢氧化物(或其硫酸盐)在高温下(900～1200℃)发生脱水或释气分解时，进行热压，只需加0.3～1MPa压力，保持0.5h，就可获得高密度的制品；(3)分解合成热压烧结，利用分解反应期的高度活性，在压力作用下与异类物质产生反应，然后再在压力作用下烧结成致密陶瓷，如氢氧化钡或碳酸钡分解的氧化钡与二氧化钛合成为钛酸钡等。
