反应热压烧结,reactive hot-pressing
1)reactive hot-pressing反应热压烧结
1.(ZrB2-ZrO2)/BN composites were prepared byreactive hot-pressing at 1600 ℃ under 30 MPa for 90 min using BN,ZrO2,B4C and C as original materials.采用反应热压烧结工艺制备了BN-ZrB2-ZrO2复合材料。
英文短句/例句
1.Influence of sintering additive on the performance of B_4C based composites sintered by reaction hot-pressing烧结助剂对反应热压烧结B_4C基复合材料性能的影响
2.In-situ reaction hot-pressing sintering process of SiC/MoSi_2 compositesSiC/MoSi_2复合材料的原位反应热压烧结工艺
3.Microstructure and Mechanical Properties of Reactive Hot-Pressed BN-ZrB_2-ZrO_2 Composites反应热压烧结BN-ZrB_2-ZrO_2复合材料的显微组织与力学性能
4.Research on Mechanical Properties of SiC/MoSi_2 Composites Prepared by Technology of In-situ Reaction Hot-pressing Sintering原位反应热压烧结SiC/MoSi_2复合材料的力学性能研究
5.Synthesis of Al_2O_3/Ti_2AlC Composite by in-situ Hot-pressing Method热压反应烧结法制备Al_2O_3/Ti_2AlC复合材料及其微观结构和性能
6.Research on Technical Process and Properties for Reaction Formation and Post-Hot-Pressing Preparation of Si3N4/MoSi2 Composite;反应形成—热压烧结制备Si3N4/MoSi2陶瓷材料的工艺过程及性能研究
7.Structure and combustion reactivity of coal char pyrolyzed in different atmospheres不同热解气氛煤焦结构及燃烧反应性
8.The Theoretical Analysis and Numerical Simulation on the Residual Stresses in Thermoelectric Materials Sintering by High-pressure Method;高压烧结热电材料残余应力分析与数值模拟
9.Reaction Sintering and Thermal Stability of Al_(2(1-x))Fe_(2x)TiO_5Al_(2(1-x))Fe_(2x)TiO_5的反应烧结及热稳定性能
10.The Research on Reactive Sintering and Extrusion of Ti/Al Composite Powder Prepared by Mechanical Milling;机械球磨Ti/Al复合粉反应烧结及挤压工艺研究
11.Cold Isostatic Pressing Optimization of Reaction-Bonded Silicon Nitride;反应烧结氮化硅冷等静压成型工艺优化
12.Study on Pressureless Reaction Sintering Al_3Ti/Mg Composite;无压反应烧结制备Al_3Ti/Mg复合材料的研究
13.Effect of Al Addition on Synthesis of Ti_3SiC_2 Powder by Pressureless Reactive Sintering添加Al对无压反应烧结制备Ti_3SiC_2粉末的影响
14.It has enormous technical strength and abundant producing experience.拥有先进的反应烧结炉，高温气压烧结炉等静压压机等专业生产设备。
Ts reinfoced alumina ceramics prepared by hot pressing technology with ultra-fast heating rate based on combustion reaction燃烧反应超快升温热压制备碳纳米管/氧化铝复合材料
16.Microstructure and Mechanical Properties of Hot-pressed TiB_2-VB Composites热压烧结TiB_2-VB复合陶瓷的结构与性能
17.Catalyst sintering in fixed-bed reactors: deactivation rate and thermal history.在固定床式反应器中的催化剂烧结：失活的速度和热变化过程
18.Thermodynamics of reaction of alumina during sintering process of high-iron gibbsite-type bauxite高铁三水铝石型铝土矿烧结过程中氧化铝反应热力学
相关短句/例句
hot-pressing reaction sintering热压反应烧结
3)hot pressing reaction welding热压反应烧结连接
4)activated hot pressing sintering反应热压烧结(reactived hot pressing sintering)
5)pressureless reactive sintering无压反应烧结
1.With nanometer (75mol%Bi2O3+25mol%Y2O3) powder prepared by coprecipitation as raw material, the nanocrystalline Bi2O3-Y2O3 fast ionic conductor was fabricated throughpressureless reactive sintering technique.在T=600℃,t=2h无压反应烧结条件下,纳米晶Bi2O3-Y2O3 快离子导体材料的相对密度可达96％以上,并且微观结构致密均匀,很少有残留气孔和裂纹, 平均晶粒尺寸在100nm以下。
6)reaction sintering反应烧结
1.Microstructure and properties of Mo_2FeB_2 cermets clad layer byreaction sintering;反应烧结三元硼化物金属陶瓷覆层的组织与性能
2.Densification of laser ignitedreaction sintering of Ni-Al-Cu powder alloy;Ni-Al-Cu粉末合金激光点火反应烧结的致密化研究
3.The samples prepared by general sintering andreaction sintering are investigated by XRD,SEM and other testing means for their structure and performance.采用常规烧结法和反应烧结法烧结制品,并利用XRD和SEM等测试手段对制品的结构与性能进行了分析研究。
延伸阅读
反应热压烧结(reactived hot pressing sintering)分子式：CAS号：性质：又称反应热压烧结(reactived hot pressing sintering)或分解热压烧结(detomposition hot pressing sintering)。利用高温下粉料可能发生某种固相物理化学反应时处于较高能量的活化状态下进行热压烧结的方法。有以下几种类型：(1)相变热压烧结，如利用氧化锆在980～1100℃之间发生相变，同时进行热压，可获得高密度的细晶陶瓷；(2)分解热压烧结，如利用镁或铝的氢氧化物(或其硫酸盐)在高温下(900～1200℃)发生脱水或释气分解时，进行热压，只需加0.3～1MPa压力，保持0.5h，就可获得高密度的制品；(3)分解合成热压烧结，利用分解反应期的高度活性，在压力作用下与异类物质产生反应，然后再在压力作用下烧结成致密陶瓷，如氢氧化钡或碳酸钡分解的氧化钡与二氧化钛合成为钛酸钡等。
