溶胶–凝胶法,sol-gel method
1)sol-gel method溶胶–凝胶法
1.Electric properties of Na_(0.5)Bi_(0.5)TiO_(3-)K_(0.5)Bi_(0.5)TiO_3 system ceramics prepared bysol-gel method溶胶–凝胶法制备NBT-KBT系陶瓷及其电性能
2.The nanometer YSZ (ZrO2+9mol%Y2O3) powder was prepared by modifiedsol-gel method, with non-polluted oxalic acid as precipitator, low-cost ZrOCl28H2O and Y(NO3)36H2O as precursor, and PEG400 and PEG4000 as compound surfactant.以无污染的草酸为沉淀剂,廉价的无机盐ZrOCl2·8H2O和Y(NO3)3·6H2O为前驱物,PEG400和PEG4000为复合表面活性剂,采用HCl调节pH值、无水乙醇超声分散等手段,对传统溶胶–凝胶法进行了改进。
3.35TiO3 thin films were prepared bysol-gel method on fused quartz and Al2O3 substrates.用溶胶–凝胶法在石英和Al2O3单晶衬底上沉积Ba0。
2)sol–gel method溶胶–凝胶法
1.00, 口 denotes a cation vacancy) were synthesized successfully via thesol–gel method.利用溶胶–凝胶法合成系列阳离子/阴离子双缺陷型氧基磷灰石Ca3–3xLa7+2x口x(SiO4)6O1。
2.Sm_2O_3 optical thin film was prepared on glass and Si(100) substrates by thesol–gel method using samarium dichloride as raw material, and the thin film was heat treated at 300—800 ℃ for 1—3 h.以氯化钐为起始原料,采用溶胶–凝胶法在玻璃和Si(100)基板上制备了Sm_2O_3光学薄膜,在300～800℃对薄膜进行1～3h热处理。
3.Ytterbium-doped gadolinium gallium garnet(Yb:Gd3Ga5O12,Yb:GGG) polycrystalline powder were synthesized by asol–gel method.采用溶胶–凝胶法合成了Yb:Gd3Ga5O12(Yb:GGG)多晶粉体。
3)sol-gel process溶胶–凝胶法
1.Lead zriconate titante (PZT) ferroelectric thin films grown on Pt/Ti/SiO2/Si substrates by a simplesol-gel process, without reflux or high temperature distillation to remove water.通过简单的溶胶–凝胶法和快速热处理工艺,获得了在Pt/Ti/SiO2/Si基片上生长良好的PZT薄膜。
2.NASICON was prepared bysol-gel process.该传感器是将溶胶–凝胶法制备的NASICON材料均匀涂敷在Al2O3陶瓷管上,烧结形成厚膜,加热丝穿过管内提供热量。
4)sol-gel溶胶–凝胶法
1.Fine powders formed by nanometer Ag clusters embedded in SiO2 (SiO2:nm-Ag) were prepared bysol-gel method.采用溶胶–凝胶法制备了掺纳米银的二氧化硅(SiO2:nm-Ag)微粉,并探讨其形成机理。
2.TiO2 film is prepared on the 316 stainless steel bysol-gel.通过溶胶–凝胶法在316L不锈钢表面制备TiO2薄膜。
5)sol-gel method溶胶-凝胶法
1.Study of structure and properties of LTCC of MgO-Al_2O_3-SiO_2 system bysol-gel method;溶胶-凝胶法制备MgO-Al_2O_3-SiO_2系LTCC基板材料及其结构性能研究
2.Study on the effect of ethylenediamine on the morphology of nano-ZnO prepared bysol-gel method;乙二胺对溶胶-凝胶法制纳米ZnO形貌的影响研究
3.Study on Preparation and Technology Factors of Nanometer γ-Al_2O_3 Powder by Sol-Gel method;溶胶-凝胶法合成纳米γ-Al_2O_3工艺研究
英文短句/例句
1.Preparation of RDX/SiO_2 Film by Sol-gel Method溶胶-凝胶法制备RDX/SiO_2膜
2.Preparation of SnP_2O_7 Powders by Sol-Gel Method溶胶-凝胶法制备SnP_2O_7粉体
3.Inorganic/Organic Composites by Sol-Gel Techniquse用溶胶-凝胶法合成有机/无机复合材料
4.Prepare Wood/inorganic Materials by Sol-Gel Process;溶胶-凝胶法制备木材/无机复合材料
5.Preparation of Nanometer Tin Dioxide Particles by Sol-gel;溶胶-凝胶法制备SnO_2纳米微粒
6.Preparation of Alumina Aerogels with Sol-Gel Method by Ambient-dried Technique常压干燥溶胶－凝胶法制备Al_2O_3气凝胶
7.Preparation of Organic-inorganic Composite Binder by Sol-gel Process溶胶凝胶法制备有机无机复合胶粘剂
8.Preparation and Characterization of Silica Aerogels with SoL-Gel Method by Ambient-dried Technique;常压干燥溶胶—凝胶法SiO_2气凝胶制备和表征
9.The Gel Mechanism of Nano-TiO_2 Derived by Sol-Gel Method and the Phase Transformation;纳米TiO_2的溶胶－凝胶法的凝胶机理及晶相转化
10.Novel Method of Fabricating Porous Silica Film with Two Step Catalyze Sol-Gel Process溶胶凝胶法制备多孔SiO_2薄膜的新方法
11.Applications of Sol-Gel Process in New Glasses Materials溶胶—凝胶法在新型玻璃材料中的应用
12.Fabrication and Evaluation of Coatings on Titanium by Sol-gel Method;溶胶—凝胶法钛表面涂层的改性研究
13.Study on Transparent and Conductive ZAO Thin Films by Sol-Gel Technique;溶胶—凝胶法研制ZAO透明导电薄膜
14.The Study on the Morphology of Nano-ZnO Synthesized by Sol-gel Method;溶胶—凝胶法制纳米ZnO粒子形貌的研究
15.Low-temperature Synthesis of Magnesium Titanate Nanopowders by Sol-gel Method;溶胶—凝胶法低温制备纳米钛酸镁粉体
16.Research on Preparation of Mn～(2+) -activated Barium Hexaaluminate Phosphors by Sol-Gel;溶胶—凝胶法制备BaAl_（12）O_（19）：Mn
17.Preparation of γ-Fe_2O_3 by Sol-gel Routine;溶胶—凝胶法制备γ-Fe_2O_3的研究
18.Study on Electrochromic Materials by Sol-gel Method;溶胶—凝胶法制备电致变色材料的研究
相关短句/例句
sol–gel method溶胶–凝胶法
1.00, 口 denotes a cation vacancy) were synthesized successfully via thesol–gel method.利用溶胶–凝胶法合成系列阳离子/阴离子双缺陷型氧基磷灰石Ca3–3xLa7+2x口x(SiO4)6O1。
2.Sm_2O_3 optical thin film was prepared on glass and Si(100) substrates by thesol–gel method using samarium dichloride as raw material, and the thin film was heat treated at 300—800 ℃ for 1—3 h.以氯化钐为起始原料,采用溶胶–凝胶法在玻璃和Si(100)基板上制备了Sm_2O_3光学薄膜,在300～800℃对薄膜进行1～3h热处理。
3.Ytterbium-doped gadolinium gallium garnet(Yb:Gd3Ga5O12,Yb:GGG) polycrystalline powder were synthesized by asol–gel method.采用溶胶–凝胶法合成了Yb:Gd3Ga5O12(Yb:GGG)多晶粉体。
3)sol-gel process溶胶–凝胶法
1.Lead zriconate titante (PZT) ferroelectric thin films grown on Pt/Ti/SiO2/Si substrates by a simplesol-gel process, without reflux or high temperature distillation to remove water.通过简单的溶胶–凝胶法和快速热处理工艺,获得了在Pt/Ti/SiO2/Si基片上生长良好的PZT薄膜。
2.NASICON was prepared bysol-gel process.该传感器是将溶胶–凝胶法制备的NASICON材料均匀涂敷在Al2O3陶瓷管上,烧结形成厚膜,加热丝穿过管内提供热量。
4)sol-gel溶胶–凝胶法
1.Fine powders formed by nanometer Ag clusters embedded in SiO2 (SiO2:nm-Ag) were prepared bysol-gel method.采用溶胶–凝胶法制备了掺纳米银的二氧化硅(SiO2:nm-Ag)微粉,并探讨其形成机理。
2.TiO2 film is prepared on the 316 stainless steel bysol-gel.通过溶胶–凝胶法在316L不锈钢表面制备TiO2薄膜。
5)sol-gel method溶胶-凝胶法
1.Study of structure and properties of LTCC of MgO-Al_2O_3-SiO_2 system bysol-gel method;溶胶-凝胶法制备MgO-Al_2O_3-SiO_2系LTCC基板材料及其结构性能研究
2.Study on the effect of ethylenediamine on the morphology of nano-ZnO prepared bysol-gel method;乙二胺对溶胶-凝胶法制纳米ZnO形貌的影响研究
3.Study on Preparation and Technology Factors of Nanometer γ-Al_2O_3 Powder by Sol-Gel method;溶胶-凝胶法合成纳米γ-Al_2O_3工艺研究
6)sol-gel process溶胶-凝胶法
1.Study on preparation of HEC/SiO2 organic/inorganic hybrid by Sol-Gel process;溶胶-凝胶法制备HEC/SiO_2杂化材料的工艺研究
2.Study on polyimide/ Al_2O_3 nanocomposite materials bysol-gel process;溶胶-凝胶法制备聚酰亚胺/Al_2O_3纳米复合材料的研究
3.Progress on Organic/Inorganic Hybrid Materials by Sol-Gel Process ——anic/Inorganic Hybrid Materials with Non-Chemical Bond Interaction Between Phases;溶胶-凝胶法合成有机无机杂化材料进展——2组分间以次价力作用的有机无机杂化材料
延伸阅读
溶胶-凝胶法分子式：CAS号：性质：一种用于制取无机固体材料和器件的方法。无机固体化合物和无机材料通常是利用高温固相反应制备，但是，一般地说，高温固相反应得到固体产物的均匀性较差，反应所需的温度较高，产物的料理论基础和形貌也无法控制。溶胶-凝胶方法利用前体物（如醇盐或无机盐）将反应物在分子的尺度上均匀混合，经溶胶和凝胶过程使之转变为固体；由于固体凝胶中反应物是在分子水平上均匀混合，避免了固相反应扩散过程，使反应可以在较低的温度下进行，还可以根据需要将凝胶成型，再经热处理得到具有一定形状的材料和器件。利用溶胶-凝胶方法可以制备出各种形态的材料，如薄膜、纤维、块体或粉末等。近年来，溶胶-凝胶方法在很多领域中得到了广泛应用，特别是在陶瓷材料和器件上制造中的应用，得到了多种均匀、具有特定微结构和性能的固体材料。
