电感式,inductive
1)inductive[英][?n"d?kt?v][美][?n"d?kt?v]电感式
1.Application ofinductive torque sensor in EPS电感式扭矩传感器在电动助力转向系统中的应用
2.The principle of aninductive steering torque sensor was proposed;the 3D DC magnetic field of the sensor was analyzed,and the signal conditioning circuit was designed.本文介绍了一种电感式转向盘转矩传感器原理,采用Ansoft对其磁场进行了分析,设计了传感器的信号调理电路,并通过实验对传感器的输出进行了标定,给出了传感器的输出特性曲线。
英文短句/例句
1.mini-inductance differential pressure transducer小型电感式压差传感器
2.variable-inductance accelerometer可变电感式加速度计
3.induction type under-voltage relay感应式低电压继电器
4.induction motor meter感应电动机式电度表
5.condenser shunt type induction motor电容分路式感应电动机
6.internal resistance induction motor内电阻式感应电动机
7.induction type over-voltage relay感应式过电压继电器
bined Power Supply System for Electronic Current Transformer;电子式电流互感器的组合式电源系统
9.cascade[inductive]voltage transformer级联式[感应式] 电压互感器
10.cascade/inductivevoltage transformer级联式/感应式电压互感器
11.pyroelectric temperature transducer [sensor]热释电式温度传感器
12.electronic shaft-speed pick-up电子式轴转速传感器
13.induction type distance relay感应式远距离继电器
14.doublesquirrel-carge induction motor双鼠笼式感应电动机
15.capacitor type smoke detector电容式感烟火灾探测器
16.(resistance) strain gauge force transducer（电阻）应变式力传感器
17.non inductance polypropylene capacitor无感式聚丙烯电容器
18.volume conductive humidity transducer [sensor]体电导式湿度传感器
相关短句/例句
multilayer chip inductor片式电感
1.The preparing methods,key technology,current status at home and abroad and the development directions ofmultilayer chip inductor,as well as the present research state of the materials fort MLCI At the same time the market and present and reviewed prospect of MLCI is forecaste片式化元器件是目前电子信息业热门话题 ,片式电感器更是片式器件研究的重中之重。
2.I have designed themultilayer chip inductor take this material as the foundation and discussed a little influences of the metal wire arrangement structure and via in the parameters of inductor.在以此材料为基础设计了多层片式电感,初步探讨了金属导线的布置结构及通孔对电感元件的一些参数的影响。
3)inductance mode电感模式
1.The fact that static synchronous series compensator(SSSC) in the constant reactance mode often potentially excite subsynchronous resonance(SSR) motivates to design a novelinductance mode,where the compensation of SSSC ininductance mode and the transmission line impedance are in the same proportion to subsynchronous frequency.针对静止同步串联补偿器(SSSC)常电抗模式下可能引起次同步谐振(SSR)的问题,提出了一种新的SSSC控制模式——电感模式。
4)chip inductor片式电感
1.The status and the development tendency of the low-temperature-sintering hexagonal ferrites used in thechip inductor were introduced .介绍了片式电感用低温烧结铁氧体的现状及其发展趋势。
2.In this paper, the influence of Cu2+ content on the sintering and electromagnetic properties of the low-temperture sintered MgCuZn ferrite were mainly introduced by summarizing and analyzing related literatures, and the probability of using MgCuZn ferrite as the core material for multilayerchip inductors was disscussed.根据低温烧结MgCuZn铁氧体电磁特性的有关文献报导,重点介绍了Cu2+含量对铁氧体烧结特性以及电磁特性的影响,讨论了MgCuZn铁氧体作为多层片式电感用磁芯材料的可能性。
5)inductive sensor电感式传感器
1.Based on long stator slotted effect of linear synchronous motor in high-speed maglev train,the principle of slot detection,hardware structure of the phase detector and signals subdivision with DSP were presented,the scheme of phase detection was proposed,and a new phase detector was developed based oninductive sensors and Digital Signal Processor(DSP).为了实现高速磁浮列车用直线同步电机相位的精确检测,提出了基于定子齿槽效应的相位检测方案,并采用电感式传感器和数字信号处理器,设计了相位检测器。
2.A new method is forwarded to detect the rotor position for linear synchronous motor in high speed maglev train based oninductive sensor and DSP.针对高速磁浮列车用长定子直线同步电机的特点,提出了一种基于电感式传感器和DSP的电机动子位置检测新方法。
3.Inductive sensors are widely used in engineering due to their simple structures, high output capacities, good linearity, good disturbance resistance, good stability and low prices.电感式传感器具有结构简单可靠、输出功率大、线性好、抗干扰和稳定性好、价格低廉等特点,在工程中获得了广泛的应用。
6)inductance sensor电感式传感器
1.Aninductance sensors signal processing module;一种电感式传感器信号处理模块
2.It researchs the measurement of rev in the grinding wheel dynamic balance test,introduces the basal principle and structure of a kind of newinductance sensor.介绍一种新型的电感式传感器的基本原理及结构、相关DSP数字信号处理系统,并对测速精度进行了理论分析,得出了其性能参数。
3.With this method,the principles,hardware structure and signal processing of an experimental system based oninductance sensor and FPGA are elucidated.阐述了基于电感式传感器和现场可编程门阵列(FPGA)信号处理的悬浮间隙测量系统的硬件结构、工作原理及其信号处理方法。
延伸阅读
电感式传感器由铁心和线圈构成的将直线或角位移的变化转换为线圈电感量变化的传感器，又称电感式位移传感器。这种传感器的线圈匝数和材料导磁系数都是一定的，其电感量的变化是由于位移输入量导致线圈磁路的几何尺寸变化而引起的。当把线圈接入测量电路并接通激励电源时，就可获得正比于位移输入量的电压或电流输出。电感式传感器的特点是：①无活动触点、可靠度高、寿命长；②分辨率高；③灵敏度高；④线性度高、重复性好；⑤测量范围宽（测量范围大时分辨率低）；⑥无输入时有零位输出电压，引起测量误差；⑦对激励电源的频率和幅值稳定性要求较高；⑧不适用于高频动态测量。电感式传感器主要用于位移测量和可以转换成位移变化的机械量（如力、张力、压力、压差、加速度、振动、应变、流量、厚度、液位、比重、转矩等）的测量。常用电感式传感器有变间隙型、变面积型和螺管插铁型。在实际应用中，这三种传感器多制成差动式，以便提高线性度和减小电磁吸力所造成的附加误差。变间隙型电感传感器 这种传感器的气隙δ随被测量的变化而改变,从而改变磁阻（图1）。它的灵敏度和非线性都随气隙的增大而减小，因此常常要考虑两者兼顾。δ一般取在0.1～0.5毫米之间。 变面积型电感传感器 这种传感器的铁芯和衔铁之间的相对覆盖面积（即磁通截面）随被测量的变化而改变,从而改变磁阻（图2）。它的灵敏度为常数，线性度也很好。螺管插铁型电感传感器 它由螺管线圈和与被测物体相连的柱型衔铁构成。其工作原理基于线圈磁力线泄漏路径上磁阻的变化。衔铁随被测物体移动时改变了线圈的电感量。这种传感器的量程大，灵敏度低，结构简单，便于制作。
