大方坯连铸,bloom continuous casting
1)bloom continuous casting大方坯连铸
1.Research on secondary cooling technologies forbloom continuous casting;大方坯连铸二冷技术研究
2.Optimization geometry of submerged entry nozzle forbloom continuous casting mould;大方坯连铸结晶器浸入式水口结构优化
3.A three-dimensional mathematical model to represent electromagnetic field and flow field inbloom continuous casting mold with electromagnetic stirring was established,and solved by the finite element method and finite volume method,respectively.建立了描述大方坯连铸结晶器电磁搅拌过程的电磁场和流场三维数学模型,并分别用有限元、有限体积法进行数值求解,对电磁场计算结果进行了实测检验。
英文短句/例句
1.Measurement of the Solidified Shell Thickness in the Secondary Cooling Zone of Continuous Casting of Bloom大方坯连铸二冷区凝固坯壳厚度测试
2.Operation Practice for Optimizing Tail Billet by 5 Strand Bloom Continuous Caster五流大方坯连铸机尾坯优化操作的实践
3.Research and Development of Mould Fluxes in 20 Steel Bloom Continuous Casting;20钢大方坯连铸保护渣的开发与研究
4.Key Technology Development for 360 mm×450 mm Bloom Caster at PISCO攀钢360mm×450mm大方坯连铸关键技术开发
5.Overall technical design of No.4 bloom CCM at LISC莱钢炼钢厂大方坯连铸机总体工艺设计
6.Study on Flow Field and Application on No.3 Billet Caster Tundish at Chonggang;重钢3～#机大方坯连铸中间包流场研究与应用
7.Research on Development of a Process Control System in Baosteel s Bloom Caster Project;宝钢大方坯连铸过程机国产化项目管理研究
8.STUDY ON THE GEOMETRY OF SUBMERGED ENTRY NOZZLE FOR BLOOM CASTING大方坯连铸结晶器浸入式水口结构研究
9.Revamping and upgrading of the bloom secondary cooling control system in Laiwu Special Steel莱钢特钢大方坯连铸二冷配水系统的改造实践
10.Experimental Research on Water Modeling of Liquid Steel Flow Field in Tundish for Five-strand Bloom Caster五流大方坯连铸中间包的水模型实验研究
11.Optimization of Bloom Casting Process for R3 Grade Offshore Mooring Chain SteelR3级海洋系泊链用钢大方坯连铸工艺优化
12.Development and Application of Dynamic Soft Reduction Control Model in Bloom Continuous Casting Machine大方坯连铸动态轻压下控制模型的开发与应用
13.Numerical simulation of surface temperature of Q345 bloom in continuous castingQ345大方坯连铸过程表面温度变化的数值模拟
14.Reliability analysis of sustainment frame in active segment of bloom CCM大方坯连铸机活动段支撑架工作可靠性的研究
15.3-D Numerical Simulation of Flow Field and Temperature Field in Bloom Continuous Casting Mold With Electromagnetic Stirring大方坯连铸结晶器电磁搅拌的数值模拟
16.Development and application of dynamic simulation system for temperature field of bloom casting大方坯连铸温度场动态仿真系统的开发与应用
17.Physical and Mathematical Simulation on the Tundish and Mould for 4-Strand Bloom Continuous Caster in Panzhihua Steel;攀钢四流大方坯连铸中间包和结晶器的数理模拟研究
18.Study on Liquid Steel Behavior in Tundish and Mould for 6-Strand Bloom Continuous Caster;六流大方坯连铸中间包和结晶器内钢液行为研究
相关短句/例句
continuous bloom casting大方坯连铸
1.The hollow core copper pipe mold electromagnetic stirrer(M-EMS) forcontinuous bloom casting developed by Chengdu Oriental Leishen Standard Electric Implement Ltd.研制开发的大方坯连铸结晶器空芯铜管电磁搅拌器绝缘、绝热性能良好,未通水时,线圈对地绝缘电阻达690MΩ,通水时绝缘电阻达3。
2.A thermo-mechanical FEM model was established to analyze the heat transfer and the stress distribution of strand in thecontinuous bloom casting mold based on air gap between solidification shell and mold copper,and considering the influence of mold.模型预测的坯壳厚度和实验结果吻合良好,两者差值≤2mm,应用模型分析了大方坯连铸结晶器内的传热过程和坯壳的应力分布。
3)Bloom Concasting大方坯连铸
4)Concasting Bloom连铸大方坯
5)bloom caster大方坯连铸机
1.Analysis and improvement ofbloom caster movable framework;大方坯连铸机活动段框架分析及改进
2.Application of hydraulic oscillation on abloom caster;液压振动技术在大方坯连铸机上的应用
3.The design and features of No.2bloom caster in PanSteel;攀钢2~#大方坯连铸机的设计及特点
6)Jumbo Bloom Caster大型方坯连铸机
1.Depending on the manufacturing experience ofJumbo Bloom Caster,in allusion to the research of the control technology of Dynamic Soft Reduction,it would improve the level of theJumbo Bloom Caster manufacturing.本文介绍了动态轻压下技术在大型方坯连铸机的应用。
延伸阅读
大方岳第大方岳第，明代建筑，位于月湖东岸镇明路广济街口。大方岳第为明代贵州布政使张渊之故居，建于嘉靖年间(l522-1566年)，原第宅之附近并建有坊，即称“大方岳第”，又称“张方岳第”。该宅是以南北为纵轴线，主要由台门，大厅、中厅、后楼三进木构建筑及左右围墙组成，总占地面积约为1200平方米。现存建筑的大厅、中厅为明代原物，后进为后人所建。第一进大厅为单檐硬山式，面宽五间二弄，分别为明间、次间、梢间和边弄。明间为抬梁式用九檩，梁架用材甚大，门墩童柱截面均呈方形，后檐为青砖墙起砌，中间有门与后进相连，整个大厅除脊檩瓜柱与脊之间采用顶头拱承托外，其余均无斗拱构件，梁柱无收分卷杀，风格庄重、朴实。第二进中堂为单檐硬山式，五开间，屋身甚高，梁架为穿斗式，用九檩八柱(前有双步梁)，前檐柱为方形，其余为圆鼓形柱础。隔墙上部分芦草拌黄泥石灰，为原物，该进装饰较前进更精，梁架加工细腻；第三进后楼建筑年代较晚为重檐硬山顶，面宽五开间，有明间、梢间、次间、梁架穿斗式用七柱。大方岳第是研究明代住宅的一份实物资料。
