成孔机理,mechanism of porous formation
1)mechanism of porous formation成孔机理
1.The particles of multi hollow structure were characterized by SEM photograph with detailed discussions made on themechanism of porous formation and the effect of toluene on porous structure.用分散聚合法制备粒径约为 3μm的聚苯乙烯种子微球 ,再通过种子溶胀法及萃取得到苯乙烯 -二乙烯苯多孔共聚微球 ,使用扫描电镜证实其多孔形貌 ,讨论了成孔机理和致孔剂甲苯对孔结构形成的影
2.This paper deals with the methods of preparing multihollow polymer particles and themechanism of porous formation with explanations made to the factors that influence the porous structure.对多孔聚合物微球的制备方法和成孔机理进行了分析 ,并对孔结构的影响因素进行了说明。
英文短句/例句
1.Study on the Hole Forming Mechanism and the Properties of the Micro Porous Cassava Starch;木薯微孔淀粉成孔机理及其性能的研究
2.The effect of mechanics of different pore former on the properties of low weight high insulation sintering product不同成孔机理造孔剂对轻质保温烧结制品性能的影响
3.The Effect of Mechanics of Different Pore Former on the Properties of Fly-ash and Shale Sintering Product不同成孔机理造孔剂对粉煤灰页岩烧结制品性能影响
4.The Pore-forming Mechanism Study of Cam Bit on Percussive-Rotary Extruding DTH Drilling凸轮型冲击回转挤压钻头成孔机理的研究
5.Study on Forming Mechanism and Photoluminescence Properties in Porous Silicon;多孔硅形成机理及其荧光特性的研究
6.Drilling and forming mechanisms of ground surfaces in engineering ceramics工程陶瓷的磨削钻孔及表面形成机理
7.Study on Real-Time Signal Processing for Airborne SAR Imaging;机载合成孔径雷达成像实时信号处理研究
8.Research on Airborne Synthetic Aperture Radar Imaging Algorithm and Real-time Processing;机载合成孔径雷达成像算法及实时处理研究
9.Study of the Synthesis and Formation Mechanism of Mesoporous Molecular Sieve MCM-41;介孔分子筛MCM-41的合成及其合成机理研究
10.Pore Nucleation and Growth Mechanism of Porous Materials by Gas-solid Eutectic Growth for Upward Directional Solidification共晶反应定向凝固工艺制备多孔材料气孔形成和长大机理
11.The location mechanism of Synthesis Aperture Radar (SAR) scene matching is introduced.介绍了合成孔径雷达景象匹配的定位机理。
12.Synthesis and Formation Mechanism of Chiral Mesoporous Conducting Polymers;手性介孔导电高分子的合成及其机理探究
13.Synthesis and Mechanism of Mesoporous Silica Nanotube;介孔二氧化硅纳米管的合成与机理研究
14.Development of Macroporous Adsorption Resin Immobilized Tannins and Its Adsorption Mechanism;固化单宁大孔吸附树脂的合成及吸附机理研究
15.The Research of Ultra-clean Microsized Coal Water Slurry"s Pore Structure, Slurrying and Combustion Mechanism;精细水煤浆的颗粒孔隙、成浆及燃烧机理研究
16.Research on Mechanics of Crack and Sensibility to Gas Cavity by TIG Welding for Magnesium Alloys;镁合金TIG焊裂纹形成机理及气孔敏感性研究
17.Structure Characterization of Mesoporous Titania Wiskers and Studies on the Mechanism of Low-temperature Synthesis;介孔氧化钛晶须结构表征及低温合成机理研究
18.Synthesis and Mechanism of Multihollow Macromolecule Microspheres under Microwave Irradiation;微波辐照合成多孔高分子微球及机理研究
相关短句/例句
forming reason of porosity气孔形成机理
3)Mesopore evolution mechanism中孔形成机理
4)Pore Formation Mechanism孔隙形成机理
5)mesopore formation mechanism介孔形成机理
6)formation mechanism of cavity孔洞形成机理
延伸阅读
成核生长机理分子式：CAS号：性质：理想晶面上金属电结晶过程的理论。此理论认为，在理想平整的晶面上，由于不存在“生长点”，因此，晶体继续生长的前提是在晶面上出现新的晶核。晶核的形成是晶体生长过程的速率控制步骤。在未完成的理想晶面上，晶面的继续生长只能在少数占有最低能量位置的“生长点”或“生长线”上进行。金属离子在晶面上任一位置都可放电并形成“吸附原子”，然后通过扩散转移到“生长线”和“生长点”上。
