结构胶粘剂,structural adhesive
1)structural adhesive结构胶粘剂
1.Effect of humidity on specimen properties ofstructural adhesive FM300k;湿度对结构胶粘剂FM300k测试样本性能的影响
2.Intermediate temperature setting solvent -free epoxy resinstructural adhesive with high tenacity and high peeling strength modified by PU;中温固化高强度高剥离无溶剂聚氨酯改性环氧树脂结构胶粘剂
3.Epoxy resinstructural adhesive with high-temperature resistant of one component at intermediate temperature;中温固化单组份耐高温环氧树脂结构胶粘剂
英文短句/例句
1.The Study on High-performance Structural Adhesive of Epoxy Resin for Architecture;高性能环氧型建筑结构胶粘剂的研制
2.Study on Heat-resistant Structural Adhesives of Bismaleimide;耐高温双马来酰亚胺型结构胶粘剂的研究
3.Study on the Toughening Modification of Structural Adhesive Based on Process Engineering基于过程工程学原理结构胶粘剂增韧改性研究
4.Study on toughening modification of structural epoxy resin adhesive for building环氧树脂建筑结构胶粘剂增韧改性研究
parative Analysis of the Products Glued with Evaluation of the Creep Characteristics室外木结构用胶粘剂胶合制品抗剪切性能评价
parative Analysis of the Products Glued with Exterior Wood Structure Adhesive Evaluation of the Delamination室外木结构用胶粘剂胶合制品分层试验对比
7.Study on Properties and Evaluation of Adhesive Used in Bamboo-based Structural Materials;结构用竹质工程材料胶粘剂及其性能评价研究
8.Influence of functional monomer structure on performance of orthodontics adhesive功能单体结构对口腔正畸胶粘剂性能的影响
9.Influences of polyurethane structure on bonding performance of epoxy resin adhesive modified by polyurethane聚氨酯结构对聚氨酯改性环氧树脂胶粘剂粘接性能的影响
10.To stick or fasten with or as if with glue.胶合用或像用粘剂粘起或结合起来
11.testing methods for flexural strength of adhesives胶粘剂粘结挠曲强度的试验方法
12.Rubber cement: Adhesive used for pasting-up.橡胶胶水:拼帖用的粘结剂。
13.The Conformation of Hydrophobic Soybean Protein Isolate and Studies on New Adhesive大豆疏水分离蛋白的结构表征及新型胶粘剂的研究
14.The freezing point of the modified bone glue produced by this technics is very low and the adhesive strength is very high.所得到的改性骨胶粘合剂凝固点低 ,粘结强度高
15.The Bonding Technology of Multiple Geo-Membranes and the Test of New Type Agglomerant;复合土工膜粘结技术及新型胶粘剂的研究
16.Underwater Adhering Performance of α-Cyanoacrylate Adhesive Modified with Nano-Silicaα-氰基丙烯酸酯胶粘剂改性后的水下粘结性能
17.The results show that this adhesive has good properties.结果证明该胶粘剂具有优异的性能。
18.core, shell structure核一壳结构（粘合剂制造中形成的结构）
相关短句/例句
structure adhesive结构胶粘剂
1.In the paper, the present situation of high temperature curingstructure adhesives and their application both at home and abroad are summaried, and their future development discussed also.本文介绍了国内外高温固化结构胶粘剂概况，重点介绍了国内高温结构胶粘剂的现状及展
2.With polyurethane(PU) modification of the blend of phenol-based epoxy propane(E-51) and diglycidyl-4,5-epoxycyclohexane-1,2-dicarboxylate(TDE-85),the high performance TDE-85/E-51 epoxy resinstructure adhesive was prepared with the mixed aromatic amine as curing agent.以混合芳胺为固化剂,通过聚氨酯(PU)对4,5-环氧环己烷-1,2-二甲酸二缩水甘油酯(TDE-85)与二酚基丙烷缩水甘油醚(E-51)环氧树脂的改性,制备了一种高强高韧的耐高温环氧树脂结构胶粘剂。
3)structural adhesives结构胶粘剂
1.The specification and study of national codes on the technical performance ofstructural adhesives;结构胶粘剂工艺性能标准的研究与制定
2.According to the peculiarity ofstructural adhesives,the paper describes the development of an environment controllable automated tension testing system.根据结构胶粘剂力学性能测试的特点,提出了一种在可控环境条件下对结构胶粘剂进行拉伸性能测试的自动化测试系统,并详细介绍了该测试系统的设计原理、硬件组成和软件实现,以及环境温度和湿度等的控制方法。
3.history and four developmeut stages in China and some other countries about room temperature curable epoxy resinstructural adhesives (RTCERSA)were descriped.本文描述了室温固化环氧树脂结构胶粘剂的历史和四个发展阶段。
4)constructional adhesive结构胶粘剂
1.Medium temperature curing one component inorganic/organic hybridization heat-resistedconstructional adhesive;中温固化单组分无机/有机杂化耐高温结构胶粘剂
2.Modification epoxy heat -resistantconstructional adhesive cured at room temperature often concludes: CTBN modification epoxy resin ;ATBN or polyetheramine modification curing agent.目前室温固化耐高温环氧树脂结构胶粘剂主要采用液体端羧基丁腈橡胶增韧环氧树脂为主体,以改性液体端胺基丁腈橡胶或聚醚胺为韧性固化剂,其最高使用温度仅120℃。
5)epoxy construction adhesive环氧结构胶粘剂
1.In this paper, using ground-based simulation facilities, the vacuum thermal cycling test was carried out on theepoxy construction adhesive.本文利用空间环境效应地面模拟设备对环氧结构胶粘剂进行了真空热循环试验。
2.In this paper,using ground-based simulation facilities,the vacuum thermal cycling test was carried out on theepoxy construction adhesive.本文利用空间环境效应地面模拟设备,对环氧结构胶粘剂进行真空热循环试验。
6)building structural adhesive建筑结构胶粘剂
1.Study of GNJ typebuilding structural adhesive;GNJ型建筑结构胶粘剂的开发
2.Building Structural Adhesive and its Application and Development;建筑结构胶粘剂及其应用与发展
延伸阅读
结构胶粘剂分子式：分子量：CAS号：性质：一类用于受力部件上的胶粘剂。一般要求胶结接头所能承受的应力要和被粘物本身的强度相当，胶粘剂本身具有优良的耐热性、耐介质、耐大气老化、耐震动疲劳、低的蠕变和高的持久强度。大多以具有三向交联结构的热固性树脂为主体，配以热塑性树脂或橡胶型增韧剂组成。主要用于机械制造和高速运载工具（如飞机、火箭、导弹）制造等现代工业技术部门中。其品种主要有环氧-尼龙、环氧-丁腈、环氧（芳胺固化）、酚醛-丁腈、酚醛-环氧、聚酰亚胺、聚苯并咪唑等。
