高温固相法,high temperature solid-state method
1)high temperature solid-state method高温固相法
1.The layered cathode materials LiNi1/3Co1/3Mn1/3O2 for Li-ion battery were synthesized byhigh temperature solid-state method,sol-gel method and carbonate co-precipitation method,respectively.采用高温固相法、溶胶-凝胶法和碳酸盐共沉淀法分别制备了锂离子电池层状正极材料LiNi1/3Co1/3Mn1/3O2。
2.Based on this subject, carbon-coated LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 cathode materials synthesized viahigh temperature solid-state method was firstly discussed in detail.本文首次对高温固相法碳包覆改性LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2进行了系统的研究。
3.V5+ doped titanium-bearing blast furnace slag as a kind of antibacterial materials based on photocatalysis was prepared byhigh temperature solid-state method.采用高温固相法制备了V5+掺杂含钛高炉渣光催化抗菌材料。
英文短句/例句
1.High temperature immobile phase was used to prepare adsorbent for lithium ion.采用高温固相法制备锂离子吸附剂。
2.Preparation of LiMnO_2 by high-temperature solid-state method and its modification by doping高温固相法制备LiMnO_2及其掺杂改性
3.Study on the Process for Producing SrAl_2O_4: Eu~(2+), Dy~(3+) by Solid Phase ReactionSrAl_2O_4：Eu~（2+），Dy~（3+）的高温固相法合成工艺研究
4.Research on Influence Factor Originated from Granularity of Starting Materials in Synthesis of Zircon Powders by High Temperature Solid State Reaction原料粒度对高温固相法制备锆英石粉体的影响
5.Synthesis of Cathode Materials Li_3V_2(PO_4)_3/C by using Microwave High-temperature Method微波高温固相法合成正极材料Li_3V_2(PO_4)_3/C及其电化学性能
6.Sr_3Al_2O_6: Eu Phosphor Synthesized by Solid State Reaction Method;用高温固相反应法合成Sr_3Al_2O_6：Eu荧光材料
7.Study on Preparation of Oxide Powders Used as High Temperature Structural Ceramics via Solid State Reaction at Low-heating Temperature低温固相法制备高温结构陶瓷用氧化物粉体研究
8.high temperature gas chromatography高温气相色谱(法)
9.Synthesis of Phosphate Powders Intermingled with Alkali Earth Metal Ions by Solid State Reaction高温固相反应法制备碱土金属离子掺杂锆磷酸盐粉体的研究
10.Preparation of Aluminum Oxynitride Powders by Solid-State Reaction高温固相反应工艺制备AlON粉体
11.Optimization of high-temperature solid-phase process for LiFePO_4 synthesisLiFePO_4高温固相合成工艺优化研究
12.Synthesis of Nanoscale Ferric Oxide Via Solid-state Reaction;室温固相合成法制备纳米Fe_2O_3粒子
13.Synthesis Research on Rare Earth Doped Strontium Aluminate Long Afterglow Luminescent Material低温固相反应法合成铝酸锶铕镝研究
14.Solid State Synthesis of CoFe_2O_4 Nanoparticles at Low Heating Temperatures低温固相反应法制备CoFe_2O_4纳米颗粒
15.Study on technology of Cu(gly)_2 prepared by room temperature solid-state reaction室温固相法制备甘氨酸铜的工艺研究
16.high temperature dry dye fixation轧染高温干固法，轧染焙烘法
17.The Solid State Reactions under Normal Pressure and High-pressure and High-temperature in SiO_2-ZrO_2 System;SiO_2-ZrO_2系统的常压固相反应和高压高温反应
18.Numerical Simulation for Solid Phase Forming Process of Typical Engineering Polymers under High Temperature;典型工程高聚物的高温固相成形数值模拟
相关短句/例句
high temperature solid-state reaction高温固相法
1.Spinel LiMn_2O_4 was synthesized byhigh temperature solid-state reaction.采用高温固相法制备尖晶石型LiMn2O4电极材料。
2.LiMn2O4 was synthesized byhigh temperature solid-state reaction.采用高温固相法制备LiMn2O4。
3.The synthesis of ABF_3 samples were carried out byhigh temperature solid-state reaction method.本文采用高温固相法合成了系列ABF_3复合氟化物,通过用XRD及透射电镜分析确定所制备的样品具有钙钛矿的晶体结构,平均粒径在100nm以下,属于纳米级。
3)solid-state reaction高温固相法
1.A red-emitting KGd(WO4)2: Sm3+ was synthesized bysolid-state reaction.采用高温固相法合成KGd(WO4)2:Sm3+荧光粉,样品在近紫外区404nm光激发下发射出Sm3+的特征光谱。
2.The phosphor yttrium aluminum garnet Y3Al5O12(YAG),activated with tr ivalent cerium(Ce3+)and gadolinium(Gd3+)Y3Al5O12:Ce,Gd(YAG:Ce,Gd)was synthesized through ultrasonic decentralization technology andsolid-state reaction(SS).采用超声波分散技术结合高温固相法合成了小颗粒铈钆激活的钇铝石榴石Y3Al5O12:Ce,Gd(YAG:Ce,Gd)荧光粉材料,并对其作了后处理,主要讨论了YAG:Ce,Gd的制备工艺条件,掺杂稀土离子等因素对其发光性能的影响,并且通过X射线对其进行了晶体分析,用扫描电镜进行了形貌分析,用荧光光度计F-4500测量了其激发光谱与发射光谱,用SPR-9200荧光粉光色参数综合分析系统对荧光粉光色参数分析测试。
3.It can be synthesized by different methods:solid-state reaction, combustion, co-precipitation, sol-gel, spray prolysis, et al.Ce 3+激活的钇铝石榴石Y3 Al5 O1 2(YAG)荧光粉是一种光致发光材料,可以通过各种方法制备获得,如:高温固相法、燃烧法、共沉淀法、溶胶-凝胶法、喷雾热解法等,而且通过掺杂其它元素,如用镓取代铝、用钆取代钇等方式改变YAG:Ce荧光粉的基质结构,或者掺杂不同的激活剂,来达到改变其发光特性的目的。
4)solid sintering technology高温固相法
1.The SrAl_2O_4∶Eu~(2+),Dy~(3+) luminous materials with high brightness and long persistence have been synthesized bysolid sintering technology using carbon as reductant.采用高温固相法,在碳粉还原条件下制备了发光亮度高、余辉时间长的SrAl2O4∶Eu2+,Dy3+长余辉发光材料,对其发光性能进行了研究。
2.The Sr2MgSi2O7∶Eu2+,Dy3+ luminous materials were synthesized bysolid sintering technology at the presence of carbon as reductant.在碳粉还原条件下,采用高温固相法制备出了亮度高、余辉时间长的Sr2MgSi2O7∶Eu2+,Dy3+长余辉发光材料,并对其性能以及影响其发光性能的因素进行了研究。
3.CaTiO3:Pr3+ luminous materials with high brightness and long persistence were synthesized bysolid sintering technology.采用稀土直接掺杂工艺和高温固相法,制备出发光亮度较高、余辉性能较为优良的红色长余辉发光材料CaTiO3:Pr3+,并对其发光性能进行了研究。
5)high temperature solid state method高温固相法
1.In the paper,photo-stimulated luminescence material SrS∶Eu,Sm was prepared byhigh temperature solid state method.采用高温固相法制备了SrS∶Eu,Sm光激励发光材料。
6)Microwave-assisted high temperature method微波高温固相法
延伸阅读
固相萃取法分子式：CAS号：性质：根据被萃取组分与样品基质及其他成分在固定相填料上作用力强弱的不同，使之彼此分离的技术。首先用适当的溶剂将固相萃取吸附剂润湿，然后加入一定体积的被处理样品溶液，使其完全通过吸附剂，让溶液中被测组分保留在吸附剂上，而大量的溶剂和其他不易保留在固相萃取吸附剂上的组分完全流出，再加入适当的洗涤剂从固相萃取吸附剂上除去其他不需要的组分，最后用洗脱液把保留在固相萃取吸附剂上需要测定的组分洗脱下来，直接供测定使用。具有快速、高效、重复性好、选择性好等优点。固相萃取装置主要有柱型和盘状薄膜型，通常是一次性使用，此技术在环境样品前处理的应用主要是对水样的处理，也可用于大气样品的前处理。此法与色谱分析的在线联用越来越广泛，如柱型固相萃取-高效液相色谱的在线联用、固相萃取-气相色谱的在线检测联用等。
