硫离子,Sulfide
1)Sulfide[英]["s?l,fa?d][美]["s?l,fa?d]硫离子
1.Determination of TraceSulfide by a Reverse Flow Injection with Chemiluminescence Detection;反向流动注射化学发光法测定痕量硫离子
2.The Spontaneous Passivation of Stainless Steel in Simulated Cooling Water and the Influence ofSulfide;模拟冷却水中不锈钢的自钝化及硫离子的影响
3.The separation and determination of trace sulfide in water, combined with flow injection analysis is carried out by low ion chromatography with chemiluminescence detection.结合流动注射技术,将低压离子色谱与化学发光联用检测痕量硫离子。
英文短句/例句
1.Theoretical Analysis of Beam-foil Spectra of Highly Ionized Sulfur Ions高离化态硫离子束箔光谱的理论分析
2.DETERMINATION OF SULFIDE IN WASTEWATER BY Ag/S IONSELECTIVE ELECTRODE银硫离子选择电极测定工业废水中的硫化物
3.Effect of Sulfide Ion on Viscosity of HPAM Solution and Sulfide Removal硫离子对HPAM溶液黏度的影响及除硫方法研究
4.SIMULTANEOUS DETERMINATION OF CYANIDE AND SULFIDE BY ION CHROMATOGRAPHY WITH ELECTROCHEMICAL DETECTION电化学检测器-离子色谱法同时测定微量的氰离子和硫离子
5.INDIRECT DETERMINATION OFTRACE SULFUR ION BY FLAME AAS火焰原子吸收分光光度法间接测定微量硫离子
6.Study on the Gasoline"s Oxidation Desulfurization and Iron Liquid Extraction Desulfurization汽油氧化脱硫和离子液体萃取脱硫的研究
7.Determination of sulfite in flue gas desulfurization with seawater by ion chromatography离子色谱法测定烟气脱硫海水中的亚硫酸根离子
8.Design of Thiourea Receptors for Anion Recognition;硫脲类阴离子受体的设计与阴离子识别
9.The Relation Between Sulfureted Hydrogen System Grouping and Characteristic of Cations;常见阳离子硫化氢系统分组与离子特性的关系
10.Determination of trace chloride and sulfate in chromic anhydride by ion chromatography离子色谱法检测铬酐中的痕量氯离子和硫酸根
11.Research of the Testing Measure of S and Cl～- in Cement Industry;水泥工业硫、氯离子检测方法的研究
12.The Determination of Sulfate in Etching Baths of Alumimium Foil by Ion Chromatography;离子色谱法测定铝箔腐蚀液中硫酸根
13.The Complex Reaction of Iron(Ⅲ) with Potassium Thiocyanate;铁(Ⅲ)离子与硫氰酸钾的配合反应
14.Studies on Determination of Organic Compounds Containing Sulphur with a Sulphide Ion-Selective Membrane Electrode;离子选择电极电位法测定硫脲衍生物
15.Calcium Sulfate Whiskers Prepared by Ion-exchange Method and Its Modification离子交换法制备硫酸钙晶须及其改性
16.The Application of Hydrophilic Ionic Liquids in Fuel Oils Desulfurization亲水性离子液体在油品脱硫中的应用
17."ONE POT" DESULFURIZATION OF STRAIGHT-RUN DIESEL OIL WITH IONIC LIQUID直馏柴油应用离子液体“一锅法”脱硫
18.Esterification catalyzed by ionic liquids of imidazolium hydrogen sulfate咪唑硫酸氢盐离子液体催化酯化反应
相关短句/例句
Sulfide Ion硫离子
parison of anti-corrosion behavior to chloride ions and sulfide ions between 304 and 316L stainless steel;304、316L不锈钢耐氯离子和硫离子性能比较
2.Determination of sulfide ion using Screen-printed electrochemical biosensor;丝网印刷电化学传感器测定硫离子
3)Sulfur ion硫离子
1.The linear range for sulfur ion is found to be from 1.在弱酸条件下,硫离子与过量的铜离子反应,生成CuS沉淀,离心分离后,用火焰原子吸收法测定溶液中剩余的铜,从而间接计算硫含量。
2.The joint effect of temperature and sulfur ion on the carbon dioxide corrosion behavior of N80 steel was investigated by electrochemical impedance spectra(EIS).应用电化学阻抗谱(EIS)、扫描电镜(SEM)及能谱(EDS)研究了温度和硫离子交互作用下,N80钢的CO2腐蚀电化学行为及腐蚀膜的形貌与组成。
4)sulfion硫离子
parison of cyanidation rates of gold, silver and copper and influences ofsulfion on them;金、银和铜氰化溶解速率及硫离子对其影响的比较
2.A piezoelectric method is proposed for the determination ofsulfion in the concentration range of 2×10 -7 ～1×10 -5 mol/L.对于硫离子的测定,提出了包括极谱分析法[1]、电位分析法[2]、分光光度法[3]。
5)ion sulphurizing离子渗硫
1.In the process ofion sulphurizing,the ion sulphurized layer is formed through aggradation of sulphide produced on stainless stee.对7A52铝合金及45钢表面活性屏离子渗硫层的制备及形貌结构进行了研究。
2.Theion sulphurizing technology,including its basic principle and technical characteristic,its history,current situation and trend have been reviewed in this paper.对离子渗硫的基本原理、技术特点、发展历史及现状和发展方向作了综合评述。
3.This paper deals with the study on the combined treatment of ion nitrocarburizingion sulphurizing of W18Cr4V steel The experiment showed that the compound layer with nitride and sulphide is obtained in surface of W18Cr4V steel by the combined treatment of ion nitrocarburizing and sulphurizing The compound layer greatly improves the wear resistance of W18Cr4V stee本文研究了Ｗ１８Ｃｒ４Ｖ钢的离子氮碳共渗－离子渗硫复合处理工艺。
6)ion sulfurization离子渗硫
1.Sulfide layer was made on the surface of high speed steel (W6Mo5Cr4V2) by means of low temperatureion sulfurization.采用低温离子渗硫工艺在 W6 Mo5 Cr4 V2高速钢表面制备了硫化物固体润滑层 ,在 MM- 2 0 0型摩擦磨损试验机上对渗硫层的摩擦学性能进行了干摩擦试验研究 ,用原子力显微镜及扫描电子显微镜和 X射线光电子能谱分析渗层表面、截面、磨面的形貌及成分 ,用 X射线衍射仪分析了渗硫层相结构 。
2.High speed steel, die steel, and plain carbon steel were sulfurized by means of low temperatureion sulfurization process, allowing the formation of sulfide layers mainly composed of FeS with a thickness of 10μm.采用低温离子渗硫技术处理高速钢、模具钢和45#钢3种材料,使其表面形成以FeS为主、厚约10μm、由纳米级球状颗粒组成的固体润滑渗硫层,并采用QP-100型摩擦磨损试验机考察了这3种钢表面渗硫层在油润滑条件下的摩擦学性能,用扫描电子显微镜和X射线衍射仪观察分析了渗硫层截面、磨损表面形貌及相结构,利用X射线光电子能谱仪分析了磨痕表面边界润滑膜的化学状态。
3.The lubrication wear resistance gradient material is the development ofion sulfurization technology.从专利、文献的角度分析了离子渗硫技术、设备在冶金、机械等领域的进展和应用情况。
延伸阅读
5-硫基-3-苯基-2-硫-1,3,4-硫代二唑,钾盐CAS: 17654-88-5 分子式: C8H6N2S3 中文名称: 铋试剂II；3-苯基-1,3,4-噻二唑亚基-2,5-二硫酮；5-硫基-3-苯基-2-硫-1,3,4-硫代二唑,钾盐；铋试剂 II 英文名称: BismuthiolII；5-Mercapto-3-phenyl-2-thio-1,3,4-thiodiazole, potassium salt；4-thiadiazole-2-thione, 5-mercapto-3-phenyl-2h-3；4-thiadiazolidine-2,5-dithione, 3-phenyl-3；3-phenylbismuthol；5-mercapto-3-phenyl-2h-1,3,4-thiadiazole-2-thione；3,4-Thiadiazolidine-2,5-dithione, 3-phenyl-1
