层状复合陶瓷,Laminated ceramic composites
1)Laminated ceramic composites层状复合陶瓷
1.Based on the multilayer beam model, with a view to the heterogeneity of the material, this paper focused on the fracture behavior of the laminated ceramic composites by the finiteelement method.基于多层梁模型,在考虑材料非均匀性的基础上,采用有限元数值模拟的方法研究 了层状复合陶瓷的断裂行为。
2.In this paper,the different mechanisms that can be used to reinforce laminated ceramic composites were reviewed,optimum design f such composites was analyzed and preparation was concluded.层状复合陶瓷具有显著的增韧效果 ,其独特的层状结构为陶瓷材料的设计和制备工艺技术提出了新的研究课题 ,成为当前陶瓷增韧技术研究的热点。
3.The dated work about laminated ceramic composites is reviewed- The preparation methods, the bonding be-tweed interfaces and the effects of interfaces on the Iaminated ceramic composites were discrided.本文综合评述了层状复合陶瓷研究现状，分析了层状复合陶瓷的制备工艺和界面结合情况以及界面对层状复合陶瓷性能的影响。
英文短句/例句
1.Study of the ZrO_2/Al_2O_3 Laminated Compound Ceramics;ZrO_2/Al_2O_3系层状复合陶瓷材料的研究
2.The Research on the Producing and Mechanical Character of Laminated Ciramic层状复合陶瓷的制备与机械性能研究
3.STUDY ON PREPARATION AND PROPERTIES OF B_4C/TiB_2 LAMINATESB_4C/TiB_2层状复合陶瓷的制备与性能研究
4.Study on Properties of ZrO_2-Al_2O_3 Laminated Ceramics;氧化锆—氧化铝层状复合陶瓷的性能研究
5.Design, Fabrication and Application of Multilayered Ceramic Nozzles层状复合陶瓷喷嘴的设计制造及其应用研究
6.Oxidation Behavior of AlN and AlN/BN Laminated Composites Ceramics at High TemperaturesAlN和AlN/BN层状复合陶瓷的高温氧化行为
7.Numerical analysis of laminated ceramic composites by non-Fourier heat conduction非傅立叶模型层状复合陶瓷结构热传导分析
8.Preparation, Microstructure and Mechanical Properties of Mullite/Aluminum-Titanate Laminated Ceramics;莫来石/钛酸铝层状复合陶瓷的制备、结构和性能的研究
9.A Model of Thermal Stresses in a Ceramic/Cemented Carbide/Ceramic Sandwich Compound陶瓷/硬质合金/陶瓷夹层复合片应力分析模型
10.CURRENT SITUATION AND PROGRESS OF CARBON/CARBON, CERAMIC/CERAMIC COMPOSITE MATERIAL MADE IN FRANCE法国碳/碳、陶瓷/陶瓷复合材料的现状与进展
11.Preparation of Composite Ceramic Incombustible Coating for Aluminum Alloy Surface铝合金表面复合阻燃陶瓷涂层的制备
12.Electrophoretic Deposition and Laser Cladding Manufacture Cermets Composite Coating电泳沉积-激光熔覆金属陶瓷复合涂层
13.A Technical Study of Hole Drilling in Ceramics/FRP Laminate Composite Components陶瓷/FRP层叠复合构件的制孔工艺研究
14.CURRENT RESEARCH STATUS OF TiAl MATRIX CERAMIC COMPOSITESTiAl基陶瓷复合材料的研究现状
15.The ceramic layer does not crack or flake off when heated to800℃ and then quenched.将陶瓷内衬复合钢管加热至800℃温，然后水淬，陶瓷层不炸不裂。
16.Effects of altering magnetic field on structure and properties of ceramic lined compound pipes fabricated by SHS交变磁场对SHS陶瓷复合钢管陶瓷层结构和性能的影响
17.Performance of Synergistic Coating on Magnesium Alloy镁合金表面陶瓷/铜复合膜层的性能研究
18.The Investigation of ZrO_2 Ceramic Molding and Composite CeramicZrO_2陶瓷成型工艺和复合陶瓷的研究
相关短句/例句
laminated ceramics层状复合陶瓷
1.the composites composed of the monolithic Si3N4 ceramics and Si3N4/BNlaminated ceramics have been prepared through bullet-proof structure designing,and the behavior of armour pierced-resistance of such materials was studied.提出混杂结构设计的构思,并成功地制备了具有混杂结构的Si3N4/BN层状复合陶瓷,同时研究了材料的抗穿甲燃烧弹冲击的能力。
2.The behaviors of impact resistance and armour pierced-resistance of Si3N4/BNlaminated ceramics were studied.研究了Si3N4/BN层状复合陶瓷的抗冲击破坏及抗穿甲破坏行为。
3)laminated composite ceramics层状复合陶瓷
1.Study on fracture behavior of BN - SiClaminated composite ceramics;BN-SiC层状复合陶瓷的断裂行为研究
4)laminated ceramic层状复合陶瓷
1.The simple die_pressing technique was used to fabricate three layer Al 2O 3/ZrO 2laminated ceramics in the form of film/substrate systems.45 %Al2 O3/ZrO2 / 45 %Al2 O3层状复合陶瓷的弯曲强度达 682MPa,断裂韧性达 16。
2.The paper reviews the current work about the fracture properties oflaminated ceramic,including the analyses of several principal toughening mechanism and the effects of certain variables.本文着重讨论了层状复合陶瓷断裂特性，包括几种主要的增韧机制的分析和影响因素的讨论。
5)ZrO_2 laminated ceramicsZrO2层状复合陶瓷
1.The micro-appearance feature, the formation of twin lines of monoclinic, the phase transformation and the crystal orientation relationship ofZrO_2 laminated ceramics were studied by scanning electron micro scope(SEM),transmission electron microscope(TEM), X-rays instruments, etc.利用扫描和透射电子显微镜及X rays衍射仪等,对ZrO2层状复合陶瓷的显微形貌特征、断裂相变量及晶体学位向关系进行了深入研究。
2.The formation of indentation cracking has some relationship with the transformation stress induced by martensitic transformation, besides the relationship with the residual stress by volume change in the plastic zone inZrO_2 laminated ceramics.在ZrO2层状复合陶瓷中,压痕裂纹的形成除了因塑性区体积变化产生的残余应力外,还与相变应力有关。
6)laminated A12O3 Ceramic matrix CompositesA12O3层状复合陶瓷
延伸阅读
生物惰性陶瓷涂层-金属复合材料分子式：CAS号：性质：生物惰性陶瓷涂于医用金属基底上形成的复合材料。陶瓷材料主要是氧化物生物陶瓷和医用碳素材料。金属材料包括不锈钢、钴基合金和钛基合金等。制备涂层的方法有等离子喷涂、气相沉积、离子溅射、浸渍、烧结、电泳和热解等。复合材料主要用于制造人工骨、关节柄、关节臼、人工心瓣膜和人工牙根等。
