低合金高速钢,low alloy high speed steel
1)low alloy high speed steel低合金高速钢
1.Development and application of physical vapor deposition technology onlow alloy high speed steel;低合金高速钢的物理气相沉积技术应用与发展
2.Microstructure and property of ultra-low alloy high speed steel,in which the expensive elements of W and Mo were decreased and inexpensive Al and minor N,Nb,RE,etc were inserted on the basis of the existinglow alloy high speed steel,were studied.研究了在现有低合金高速钢基本成分基础上,进一步降低W、Mo等价格较贵的稀有合金元素的含量,同时加入廉价的Al和微量N、Nb、RE等元素的超低合金高速钢的组织与性能。
3.To improve the service life of W4Mo3Cr4VSiN(F205)low alloy high speed steel tap, F205 steel was quenched at 1 160℃and tempered at different temperatures, and the tap tempered at an optimum temperature was then treated with ion plating.为提高W4Mo3Cr4VSiN(F205)低合金高速钢丝锥的使用寿命,对该钢进行了1 160℃淬火、不同温度下回火热处理,并对较佳工艺回火后的丝锥表面进行离子镀TiN,对其组织和性能进行了研究。
英文短句/例句
1.Study on Low-alloyed High Speed Steel Formed by Surface Metallurgy and Its Performance表面冶金形成低合金高速钢及其性能研究
2.Research on Surface Low Alloy Hss by Plasma Surface Metallurgy W、MO、C、Alloying Process;钨、钼、碳三元共渗等离子表面冶金低合金高速钢的研究
3.Preparation and Property Studies of Surface Low Alloy High Speed Steel Permeated by Mo-Cr;钼—铬共渗表面低合金高速钢的形成及其性能研究
4.Experimental Investigation into Anti-penetrating Capacity of Low Alloy Ship Hull Steel Structures to High Velocity Steel Fargment低合金船用结构钢抗高速破片能力研究
5.loy high-tensile structural steel低合金高强度结构钢
6.Weldable materials: low carbon steel , high-strength steel ,medium-carbon steel, low-alloy steel.可焊材料:低碳钢、高强度钢、中碳钢,低合金钢。
7.CARBIDES IN THE LOW-ALLOYED HSS WITH HIGH PERFORMANCE AND THEIR CONTRIBUTIONS TO THE TOOL CUTTING LIFE低合金高性能高速钢中的碳化物及其对刀具切削寿命的影响
8.according to the amount of alloy elements (except carbon), alloy steels can be divided into low-alloy steel, medium-alloy steel and high-alloy steel.根据除碳以外的合金元素的含量,合金钢可以再分为低合金钢、中合金钢和高合金钢。
9.High strength low alloy structural steelsGB/T1591-1994低合金高强度结构钢
10.An Investigation on Structure and Properties of Cr-Ni-Mn-Mo Low Carbon High Alloy Steel;铬镍锰钼低碳高合金钢组织性能研究
11.Experimental Research of High Temperature Strength of Low-alloyed Structural Steel Q345;Q345低合金结构钢的高温强度试验研究
12.Development of YCJ601Ni-QL Flux-Cored Wire Used for High-Strength Low-Alloy SteelYCJ601Ni-QL低合金高强度钢药芯焊丝的研制
13.The Research of the Heat Treatment of the Low-alloy High Strength Steel低合金高强度耐磨钢热处理工艺研究
14.Inclusions in HSLA steel containing 0.065%Ti含0.065%Ti的高强度低合金钢中夹杂物
15.Analysis on the Welding Technology of Q460 Low-alloy High-strength SteelQ460低合金高强度钢的焊接工艺分析
16.Research Status and Developments on Weld Procedure of Low-Alloy Q+A High strength steel低合金调质高强钢焊接工艺研究进展
17.Heat-treatment process for Q390 low alloy high strength steel thick plateQ390低合金高强钢厚板热处理工艺
18.The Repair in Welding Cracks on 20MnMoNi55 Low-alloy High-strength Steel20MnMoNi55低合金高强钢焊缝裂纹的返修
相关短句/例句
low carbon high alloy steel低碳高合金钢
1.Influence of substituting nickel with manganese on the structure and property of thelow carbon high alloy steel;以Mn代Ni对低碳高合金钢组织性能的影响
parison of corrosive impact abrasion behavior betweenlow carbon high alloy steel and high manganese steel;低碳高合金钢和高锰钢冲击腐蚀磨损特性研究
3.Influence of impact power on impact-corrosion resistance oflow carbon high alloy steel;冲击功对低碳高合金钢冲击腐蚀磨损性能的影响
3)wire of hi-carbon and low alloy高碳低合金钢丝
1.In order to solve the problem of crack deformation tendency of the quenched steel wires for a uniform structure,development is done to the specialwire of hi-carbon and low alloy,finding that there is variation of spheroidizing annealing processed structure under the same spheroidizing annealing process once drawed.为了改善针布齿条淬火时的变形开裂倾向性,使其最终性能均匀,研究了针布齿条专用高碳低合金钢丝经过不同程度拉拔变形后,在相同球化退火工艺下具有差异的球化退火组织,并且比较了经较大拉拔变形后钢丝退火前后的组织差异,以及该钢丝经轧制前后的组织变化情况。
4)low-alloy high-strength steel Q420Q420低合金高强钢
1.The cold-crack sensibility oflow-alloy high-strength steel Q420 was tested and studied by using maximum hardness in weld heat-affected zone and Y-groove depositing test,the deposit metal microstructure and property was analyzed by selecting many kinds of welding electrodes.采用热影响区最高硬度及斜Y坡口焊接裂纹试验对Q420低合金高强钢的冷裂纹敏感性进行了试验研究,并选用多种焊接材料进行了熔敷金属性能及金相组织的分析比较。
5)high strength low alloy steel低合金高强钢
1.This paper introduces many cracks of weld joint on thehigh strength low alloy steel spherical tank in the regular examining.本文介绍了低合金高强钢制的球罐在定期检验时发现的焊接接头裂纹。
6)Low-alloy high-strength steel低合金高强度钢
1.Based on question of developing low-alloy high-strength steel, strengthening mechanism of microalloy elements in the steel was approached.针对国内低合金高强度钢发展中存在的问题 ,探讨了该钢种微合金元素的强化机理 ,简要介绍了低合金高强度钢的成分的优化设计及生产工艺。
延伸阅读
碳素结构钢及低合金高强钢焊接方法选择本文原为高力生教授、潘际銮院士和闫炳义高级技师(焊接)参加三峡总公司召开的“三峡工程金属结构焊接专家咨询会”后的一个书面意见。编者将其节录整编成文予以发表,以期对三峡工程金属结构焊接技术的提高有所裨益。 三峡工程目前正在施工的重要结构主要有电站压力钢管、水轮机座和船闸门,其中水轮机座的施工工艺质量由国外公司负责,其余两项由国内制造商和施工单位承包,闸门制造多由国内知名船厂承担,具焊接工艺比较成熟,相对船体制造的没备和工艺已不是什么难事;由于材料为强度级别较低(Q345)的低合金钢,所以今后的主要问题是工地安装时,如何提高效率,降低成本。 压力钢管的制作和安装将成为主要矛盾,工程前期共有压力钢管14条,约22500t,由于材料复杂(上段为16MnR,下段为610U2低合金高强钢),板厚度大(最厚达58mm),特别是管道直径大(φ12499mm),安装位置复杂,因此不同于常规管道的制作和安装。 此次有幸参加了三峡开发总公司工程建设部组织的“三峡工程金属结构焊接技术专家咨询会”,受益匪浅,但由于时间太短,会前对几个承包单位的工作和试验资料未及仔细学习,所以有些意见未能允分表达,现对有些观点加以说明。 1、三峡工程压力钢管的选材思想和实践是成功的 上段选用16MnR、下段选日本NKK的60kg级的610U2都是可焊性好的钢种,特别是日本的610U2,属于低碳调质钢中的焊接无裂纹钢(CF钢),其特点是含碳量低(≤0.09)、总碳当量低(CEQ2=0.39%)、裂纹敏感系数低(PCM≤0.19)。由于在钢材生产过程中采用新技术,如在线余热淬火等,在碳当量不大情况下,增加其淬透性,并加入多种微量元素,所以能在保证高强度的同时提高其塑性和韧性(-40℃时其AKv>200J甚至达300以上),增加了在减轻重量情况下得到高质量焊缝的可能性。 2、从焊接设计出发,选择焊材的原则 16MnR是焊接结构应用最多的钢种,一般焊缝按等强设计,此钢种国内的焊接材料、焊接方法配套均非常成熟。 关于610U2类型的低碳调质钢,本来其可焊性也是较好的,但是在焊接时若处理不当,在熔合区的冷裂和影响区的脆化和软化等缺陷也有发生,在特殊情况下特别是在工地安装中,对焊接热输入和预热等方面有一定要求。 焊接无裂纹钢种,采用低H或超低H焊材,在板厚50mm以下或在0℃以上环境均可不预热。此种钢冶炼技术优越,其力学指标突出,特别是在屈强比的冲击性能方面(如本次选用的610U2就是这样),但在焊接时,如要求焊缝冲击性能达到母材要求,这显然是不合适,焊缝设计其力学指标以工作要求为主,不低于母材力学指标的保证值,再留有适当余量,而不应该以母材的实测值为标准,有时为了提高焊缝的塑韧性可适当降低焊缝的设计强度指标。实践证明,低强匹配的焊缝,往往能提高焊缝的韧性和抗裂纹敏感性。