前面关于配置iscsi-target我们已经做过了，由于target上对lun做了chap认证，所以我们在客户端上也要配置认证。
综合老外和国内使用的方法，我总结了几种方法。
_________________________________________________
第一种：全局配置的方法，客户端上连接的所有target可能都会使用这个账号和密码进行认证，适用于只有一个target
参考 http://www.server-world.info/en/note?os=CentOS_6&p=iscsi&f=2
[root@www ~]# yum -y install iscsi-initiator-utils
[root@www ~]# vi /etc/iscsi/iscsid.conf
# line 49: uncomment
node.session.auth.authmethod = CHAP
# line 53,54: uncomment and set username and password which set on iSCSI Target
node.session.auth.username = username
node.session.auth.password = password
# discover target
[root@www ~]# iscsiadm -m discovery -t sendtargets -p 10.0.0.30
Starting iscsid: Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
iscsi: registered transport (cxgb3i)
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, )
Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.1 (Mar 24, )
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
[ OK ]
10.0.0.30:3260,1 iqn.-07.world.server:target0
[root@www ~]# chkconfig iscsi on
[root@www ~]# chkconfig iscsid on
# login to target
[root@www ~]# iscsiadm -m node --login
Logging in to [iface: default, target: iqn.-07.world.server:target0, portal: 10.0.0.30,3260]
scsi2 : iSCSI Initiator over TCP/IP
scsi 2:0:0:0: RAID IET Controller 0001 PQ: 0 ANSI: 5
scsi 2:0:0:1: Direct-Access IET VIRTUAL-DISK 0001 PQ: 0 ANSI: 5
Login to [iface: default, target: iqn.-07.world.server:target0, portal: 10.0.0.30,3260] successful.
# confirm session
[root@www ~]# iscsiadm -m session -o show
tcp: [1] 10.0.0.30:3260,1 iqn.-07.world.server:target0
# confirm partitions
[root@www ~]# cat /proc/partitions
major minor #blocks name
8031457280sda
81512000sda1
8230944256sda2
253020971520dm-0
25316160384dm-1
25323809280dm-2
80104857600sdb
81104857600sdb1# added new device provided from target
# config for auto-mount when booting
[root@www ~]# vi /etc/fstab
/dev/mapper/VolGroup-lv_root / ext4 defaults 1 1
UUID=3d3f19a1-582f-4a29-a304-349750094b2c /boot ext4 defaults 1 2
/dev/mapper/VolGroup-lv_swap swapswap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /syssysfs defaults 0 0
proc /procproc defaults 0 0
# add iSCSI filesystem
/dev/sdb1/var/kvm ext4 _netdev0 0
[root@www ~]# chkconfig netfs on
___________________________________________________________________________________________
方法二：对特定的target进行修改(假如我们同时连接了多个target，必须这样)
http://zlbzhu./1413424/897422
发现target
iscsiadm -m discovery -t sendtargets -p 192.168.1.211
挂载target
iscsiadm -m node -T iqn_-.safexjt:target00 -p 192.168.1.211 -l
配置该target,默认放在客户端/var/lib/iscsi/node下面
vi /var/lib/iscsi/nodes/iqn_-.safexjt\:target00/192.168.1.211\,3260\,1/default
在node.session.*.* 段添加如下信息
node.session.auth.authmethod = CHAP
node.session.auth.username = jack
node.session.auth.password = jack
保存
#service iscsi restart
_________________________________________________________
